SINV-S Non-electric initiating System
 |
SINV-S system is sensitive to initiating impulse from SINV-P detonating cap, detonating cords and electric detonator. SINV-S detonating cap initiates 6ZhV ammonite cartridges and T-400G, TG-500 TGF-850E boosters. SINV-S shock tube is 7, 10, 16, 21, 24 or 30 m in length, as per customer demand. Devices packed by 2 to 10 pieces are laid in plastic bags and shipped in boxes. One box fits up to 240 devices. UN number: 0360. Classification code: 1.1 B.
|
SINV-S specification
|
Parameters |
SINV-S Device |
| Shock tube external diameter, mm |
3.2 |
|
Weight of explosives in shock tube, mg/m |
20 |
|
Transmission rate of initiating signal through shock wave tube, m/s |
2000 |
|
Minimum
tensile strength with operation ability retained, N
Connection of shock tube with detonating cap |
200.0
120.0
|
|
Water resistance, kgf/cm2 |
Connection of detonating cap and shock tube within 336 hours at 2.0 kgf/cm2 |
|
Operating temperature, °С |
40°С below zero to 50°С above zero;
at the temperature up to 85°С above zero within 12 hours |
|
Number of delay periods, unit |
11 |
SINV-S Delay Intervals
|
Delay Time*, ms |
Interval, ms |
|
100 |
20 |
|
125 |
25 |
|
150 |
25 |
|
175 |
25 |
|
200 |
25 |
|
250 |
50 |
|
300 |
50 |
|
350 |
50 |
|
400 |
50 |
|
450 |
50 |
|
500 |
50 |
Detailed technical data
|